In this article, we will focus on how to dissolve gorilla glue safely and quickly.
There are a few options for removing the glue. If the glue is dry, naturally, it’s harder to remove. If the gorilla glue ended up on your skin, it will be easier to remove than from items like carpet or wood.
We will present you with the best options for dissolving gorilla glue while not damaging the surface that’s been stained.
How To Dissolve Gorilla Glue
Nobody likes gluing themselves or things that aren’t mean to be glued. We will now give you some tips on how to properly dissolve gorilla glue from different surfaces.
It’s really common to end up gluing yourself when working with gorilla glue. If this happened, don’t try to pull the affected areas apart. This can damage your skin.
- Try taking a pen and rolling it slowly between the bonded fingers. Don’t force it, if you didn’t succeed in breaking the bond, move on to the next step.
- If the pen trick didn’t work, you can soak the affected areas into hot soapy water. Leave it for a couple of minutes and wait for the gorilla glue to dissolve.
- If the bond is persistent and you still can’t dissolve all the glue, apply some acetone to your glued skin. Leave it on for 4-5 minutes, and the gorilla glue should dissolve. For the fastest and most effective removal, use 100% acetone. You can get it here on Amazon.
From Other Surfaces
There are a few surfaces that you can use 100% acetone on to dissolve gorilla glue, but you can also damage surfaces like plastic when using acetone.
What we found to work best for dissolving gorilla glue for almost all surfaces is Goo Gone. This product is specially formulated to remove all glue residue without harming the surface.
You can use it on glass, metal, plastic, and many more surfaces. It will remove the glue easily. It will dissolve dry and cured gorilla glue even from carpets and flooring.
How to Use It
The application is super easy.
- Pour or spray the Goo Gone solution onto the glued surface you want to dissolve
- Wait for at least 10 minutes
- The Gorilla glue should now be dissolved and easy to remove
This is a great product we thoroughly recommend for dissolving gorilla glue from any type of surface. Buy it here on Amazon!
If you can’t use Goo gone, 100% acetone will provide you with similar results on clothing and carpet. On wood and metal, you will need to act quickly if you want to use acetone.
Wipe most of the gorilla glue with a cloth from the wooden or metal surface. After that, clean the remaining residue thoroughly with acetone. If the glue didn’t cure, this will work in most cases.
If the glue dried completely, your only hope at that point is Goo gone.
How To Prevent Accidents With Gorilla Glue
As we all know, accidents happen. It’s very common to stain your clothes and glue yourself with gorilla glue. But that doesn’t mean that accidents can’t be prevented with proper measures.
We recommend applying the glue from tubes with narrow nozzles that allow much more precision. It’s also recommended to use the one that drips slowly, drop by drop.
If you don’t have enough experience or are not that handy with the liquid glue, the gel, or high viscosity glues might be a good option. These glues are much easier to control and work with.
Gorilla has a gel version of their super glue that you can use if you don’t have enough control over the liquid version.
If you have an option to glue in a workshop, we recommend doing it. The workshop is designed for work, and there aren’t many valuables you can stain like when working in a living room.
- On clothes, you should wait for the gorilla glue to dry until you attempt to dissolve it. If you try to remove it while it’s liquid you will probably make more mess.
- Always wear protective gloves to avoid gorilla glue sticking to your fingers in the first place. Consider protective goggles as well for additional eye protection.
- If there are no solutions for dissolving available, you can try using a knife or a toothbrush and try scraping the gorilla glue away.
- Cover your workspace with foil or protective sheets. That way, you will prevent accidental spillage of glue to unwanted areas.
- If you can’t dissolve gorilla glue from your skin or feel chronic pain on the affected spot, seek medical attention immediately.
Gorilla glue accidents aren’t a disaster and can be resolved quickly in most cases by using adequate solutions. You will probably be able to dissolve most of the gorilla glue with acetone if you detect the spillage quickly.
For stronger, cured bonds, the Goo Gone solution works great.
We hope that this article has helped you remove any gorilla glue stains effectively!